View PL-XXR-00-S43-C6_4762016.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

COMMUNICATIONS COMpONENTS
850 nm 10 G ROSA PL-XXR-00-S43-C6
Key Features
*Dataratesupto10Gbps *3.3Voperation *-40Cto85Coperation *Differentialoutput *Isolatedcase *Receivedsignalstrengthindicator(RSSI) *LCorSCconnectorizedPINpluspreamplifier
Benefits
* Optional controlled impedance flex from OSA to PCBA for excellent 10 Gbps product performance * Industrial operational temperature * Industry standard form factor and size * Modulation performance verification
The JDSU 850 nm PL-XXR-00-S43-C6 connectorized ROSA product (Receiver Optical Sub-Assembly) is designed for high-speed data communication applications. The product utilizes a GaAs PIN/TIA integrated in a custom hermetic TO package. Each device is actively aligned to a precision OSA housing using a proprietary alignment algorithm and tested to precise requirements. A controlled impedance flex circuit provides the user with optimum performance. The PL-XXR-00-S43-C6 converts optical power into an electrical signal at data rates up to 10 Gbps and is engineered for performance over extended operating temperature and power conditions with high reliability. Each part is electro-optically tested to insure optimum performance and sensitivity.
NORTH AMERICA: 800 498-JDSU (5378)
wORlDwIDE: +800 5378-JDSU
wEBSITE: www.jdsu.com
850 NM 10 G ROSA
ROSA without Flex Dimensions (lC)
UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050
REV
DESCRIPTION
ECO
ENG
DATE
CHECKED
DATE
01 02
INITIAL RELEASE UPDATED DRAWING TO REFLECT CHANGES TO PARENT DWG CORRECTED PIN DIAMETERS
006501 006785 007261
DWP AK DB
31 OCT 06 20 FEB 07 21 JUN 07
PB DAC CW
01 NOV 06 27 FEB 07 21 JUN 07
03
+0.050 4.039 - 0.025 2X 5.941 6.599 0.660
10 MAX ROTATIONAL MISALIGNMENT BETWEEN TO CAN ASSY AND BARREL 5X 13.460
2X 41
A
2.0830.025 0.8380.025
BARREL KEYING FEATURE
PIN 2 +0.025 5.080 - 0.076 2.540 2X 0.250 PIN 1 3X 0.440
PIN 3 2X 82
PIN 4
2.9210.025 451 1.270 +0.38 6.50 - 0.25 4.039 OPTICAL REF PLANE
A
PIN 5
4.166 451 SECTION A-A
MUST CONFORM TO PICOLIGHT QUALITY PROCEDURE 07000056 UNLESS OTHERWISE SPECIFIED D PAQUET DIMENSIONS ARE IN MILLIMETERS DRAWN UNLESS OTHERWISE SPECIFIED TOLERANCE ARE:
CHECKED ENG DATE DATE DATE
1480 ARTHUR AVENUE LOUISVILLE, COLORADO 80027
Ph 303-530-318 9 Fx 303-530-4897
31 OCT 06 01 NOV 06
PART NO.
D PAQUET P BARTRAM
31 OCT 06
DWG, DATASHEET, ROSA 10G, LC, 4+1, STACK PIN, ULTEM
DRAWING NO. REV
pl-SxR-00-S43-C6 (no flex)
pl-FxR-00-S43-C6 (with flex)
pin 1 2 3 4 5
Symbol Vout P Vdd RSSI Vout N GND
Function TIA Output Voltage (Non-Inverted) Positive Supply Voltage Receive Signal Power, Avg. Current TIA Output Voltage (Inverted) Ground
pad 1 2 3 4 5 6
Symbol Vcc GND Vout P Vout N GND RSSI
Function Vcc Ground TIA Output Voltage (Non-Inverted) TIA Output Voltage (Inverted) Ground Receive Signal Power, Avg. Current
850 NM 10 G ROSA
3
ROSA with Flex Dimensions (SC)
UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050
1.092 7.264 +0.050 6.731 -0.025 1.035 5X 1
A
PIN 2
PIN 3
PIN 4 4.6230.025 3.124 PIN 1 9010 BARREL KEYING FEATURE 1.219 5.74 +0.38 6.18 -0.25 OPTICAL REF PLANE 0.13 0.5 0.400 6X 1.120 6.121 4X 0.92
A
10.80
PIN 5
ROSA With Flex Dimensions (SC)
PAD 6 PAD 1 0.80 PAD PITCH 6.248
2.28
B
4.840
12X SECTION A-A 6X 0.46 4X 0.38 C L 2X 0.710
0.300
DETAIL B
ROSA with Flex Dimensions (lC)
UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050
4.039+0.050 - 0.025 6.599 2.0830.025
2X 5.941
0.660
5X 1
A
PIN 2
PIN 3
BARREL KEYING FEATURE
5.080+0.025 - 0.076
PIN 4
ROSA With Flex Dimensions (LC)
0.8380.025 9010
2.9210.025 1.270 6.18+0.38 - 0.25
A
PIN 1 10.80
PIN 5
PAD 6
PAD 1 0.80 PAD PITCH
OPTICAL REF PLANE 0.13 0.40 0.5
2X 2.28
45.00.5
B
4.840
4.039 1.12 0.92 0.46
4.166
0.38 DETAIL B
0.30 2X 0.71
45.00.5 SECTION A-A
850 NM 10 G ROSA
4
Shipping Information
Shipped in anti-static stackable trays.
Absolute Maximum Ratings
(Tcase = 30 C , Continuous Wave (CW) operation unless otherwise stated)
parameter Storage temperature Incident optical power Lead solder temperature Flex attach temperature Power supply voltage
Symbol Tst Pin Ts TF VP
Ratings -40 to +100 +5 260 C for 10 sec. 2 mm from case 370 C for 10 sec. 4.0
Unit C dBm
V
Note: Conditions exceeding those listed may cause permanent damage to the device. Devices subjected to conditions beyond the limits specified for extended periods of time may adversely affect reliability.
Electro-optical Characteristics
(Tcase = 30 C , Vcc = 3.3 V unless otherwise stated)
parameter Wavelength responsivity Case operating temperature Supply voltage Supply current Bandwidth Low frequency cutoff Responsivity (@50 MHz) Sensitivity (OMA) Output resistance Optical overload Differential output voltage Duty cycle distortion Rise/Fall time Slope of RSSI vs Pin RSSI current with zero input1 RSSI linearity range
1. Connect RSSI to ground with a resistor <2500 ohms.
Symbol l Top Vcc Icc BW R S Ro
Minimum 840 -40 2.97 34 7.5
Typical 850 3.3 45 12 5000 -13 100
Maximum 860 85 3.63 61 70 -12
Unit nm C V mA GHz kHz V/W dBm W dBm mV % ps A/W uA uA
1.5 Vout 1 TR/TF RSSI slope RSSI offset RSSI range 20 0.9 5 1 285 10 45 1.1 1 1100
850 NM 10 G ROSA
Order Information
For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com.
Sample: pl-FSR-00-S43-C6
part Number PL-FSR-00-S43-C6 PL-FLR-00-S43-C6 PL-SSR-00-S43-C6 PL-SLR-00-S43-C6 Description 850nm10GROSAwithSChousing,withflex 850nm10GROSAwithLChousing,withflex 850nm10GROSAwithSChousing,withoutflex 850nm10GROSAwithLCHousing,withoutflex
NORTH AMERICA: 800 498-JDSU (5378)
wORlDwIDE: +800 5378-JDSU
wEBSITE: www.jdsu.com
Product specifications and descriptions in this document subject to change without notice. (c) 2008 JDS Uniphase Corporation 30149329 000 0308 PL-XXR-00-S43-C6.DS.CC.AE
March 2008

▲Up To Search▲

Price & Availability of PL-XXR-00-S43-C6

	To Download PL-XXR-00-S43-C6 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .